Skip to Content
Help Center
Smart Door LockYale Smart Door Lock - Master Guide

Smart Door Lock

Here, you'll find support for your Smart Door Lock.

Yale Smart Door Lock - Master Guide

Functionality

Never worry about the hassle of carrying around or losing your keys again. Lock and unlock your home with ease from the backlit keypad. Create unique entry codes for friends, family, service providers, and renters. The new Frontpoint Smart Door Lock has Z-Wave Plus built-in so you can easily integrate with your Frontpoint Security System.

Specifications

  • Manufacturer/Model Number: Yale Real Living YRD156

  • Exterior Dimensions: 1 1/16 ” x 2 9/16” x 3 9/16

  • Interior Dimensions: 3 ¾'' x 3 3/4'' x 6 ¾''

  • Component Specifications:

    • Backset: 2 3/8” or 2 ¾”

    • Face Bore Hole: 2 1/8”

    • Edge Bore Hole: 1”

    • Adjustable Latch

  • Control Panel Compatibility: Hub, XT, and IQ

    • Battery: 4 AA Alkaline Batteries

    • 9V battery used as a backup

    • Battery Life: Approx. 12 months with regular use

  • User Code Limit: 25 User Codes

  • Operating Temperature Range: -22 F to 140 F

Notes

  • The lock has a Failsafe 9V Battery Jumper Connection Method since it contains no keyhole.

  • A physical key is not provided with this lock

How to Enroll/Add Lock Module (Inclusion Mode):

  • Ensure the panel and lock are within 5' from each other

  • Press the “Yale” button to activate (wake up) the lock

  • Place the panel into Learn Mode

  • Remove the battery cover

  • Press and hold the programming button until unit beeps two (2) times

  • Release the programming button and network joining will begin automatically

  • Replace the battery cover

How to Remove/Delete Lock Module (Exclusion Mode):

  • Ensure the panel and lock are within 5' from each other

  • Press the “Yale” button to activate (wake up) the lock

  • Place the panel into Delete Mode

  • Remove the battery cover

  • Press and hold the programming button until unit beeps five (5) times

  • Release the programming button and network removal will begin automatically

  • Replace the battery cover

To Reset Lock to Factory Default Settings:

  • Remove both the battery cover and batteries

  • While holding the reset button (minimum of 3 seconds), reinstall all batteries then release the reset button

  • Replace the battery cover

Once the lock is fully reset, only the Master PIN Code programming option will be available. No other lock programming can be completed until the PIN code is set up*

To Program Master PIN Code

  • Press *

  • Enter new Master PIN code (4-8 digits)

  • Press * to complete

Click below to access the User Guide for the Smart Lock.

Need more help?

Ask a different questionSmart Door Lock
Select a different product
© Frontpoint SupportSitemap
FacebookTwitterInstagramEmployee Login