Skip to ContentHere, you'll find support for your Wired Doorbell Camera.
Wired Doorbell Camera
How do I set up Perimeter Guard with the Frontpoint app?
Perimeter Guard uses our advanced Video Analytics to sound an alert and flash the camera's status LED when unwanted visitors are detected.
Set Up Perimeter Guard with the Frontpoint app:
Log into the Frontpoint App.
Tap Video.
Tap the Gear icon for Settings.
Tap Recording Rules.
Tap on an existing Video Analytics rule, or create a new one.
Verify the initial Video Analytics settings are configured as desired, and then Tap Next.
Under Activate Perimeter Guard:
To enable the LED response:
Tap the Camera Status LED toggle to enable the LED response.
Using the Duration dropdown menu, select how long the LED response lasts.
To enable the Camera Audio Alert:
Tap the Camera Audio Alert toggle to enable the Audio Alert.
Using the Audio Sound dropdown menu, select type of sound the camera makes.
Adjust the volume using the Volume slider.
Only the most current Outdoor Camera and Indoor Camera will have the Audio Alert menu available
Using the Set Minimum Delay Between Alerts dropdown menu, select the desired amount of time the camera should not start a new alert after a previous alert has completed.
8.Tap Save.