Frontpoint Indoor Smart Plug

To add the device to your system, open the Frontpoint mobile app on your phone.​

1. Tap “+ Add Device” in the “More” navigation menu.

2. Select “Z-Wave Device”.
   3.In the “Get Started!” step, plug your Indoor Smart Plug into an outlet within 5 feet of your panel*. Press Next.​

   • While close proximity is needed for setup, you can relocate the plug to the desired location after installation. ​

3. When prompted to Trigger the Device, press the button on the Indoor Smart Plug.
   
   The LED will shine blue when the device is ON.​

   • If a 5-digit pin is requested, you can find the pin (PIN:#####) under the QR code on the side of your Indoor Smart Plug.​
     

   • Finish the prompts until a successful installation is indicated, naming your device as desired.​

4. Relocate your Smart Plug to the final location. The final location must be within 65 feet of your panel or another Z-Wave device.​

If the Indoor Smart Plug doesn't show up immediately in the mobile app after a successful installation, you can refresh by logging out and then back in.​