Skip to Content
Help Center
Display Hub+Display Hub+ Setup for Cameras

Display Hub+

Here, you'll find support for your Display Hub+.

Display Hub+ Setup for Cameras

Set up your Frontpoint cameras with your Display Hub+ to take advantage of the most advanced features included with your Frontpoint system.

Enable your cameras to stream to your panel and watch live video from all of your Frontpoint cameras to check in with what's happening at home and around your property. Use Two-Way Audio on compatible cameras to hear and speak with visitors with the walkie-talkie like, press-to-talk control system. Enable doorbell call notifications to be sent to the Display Hub+, so when the button is pushed on your Frontpoint Wired or Wireless Doorbell Camera you'll be informed someone is at your door.

When both camera streaming to the panel and doorbell call notifications on the panel are enabled, you are able to answer the doorbell button call right from the Display Hub+.

To watch camera footage on your Display Hub+, use two-way audio on the panel to talk through your cameras, and get notifications on the panel when someone rings your Doorbell Camera, follow the instructions below to complete the setup for both Streaming your cameras to the panel and Enabling doorbell call notifications.

Enable your Cameras to Stream to your Display Hub+

  1. Log into your account on

  2. Click Video in the left-hand menu.

  3. Click settings in the top right corner.

  4. Click Stream Video to Security Panel Screen near the bottom of the list.

  • If you are unable to find the Stream Video To Panel option, log out of your account and log back in, then restart these steps from step 2.

Select the cameras you would like to stream to the panel by clicking the check box under View at the Panel for each camera or click Enable All to select all cameras on your system.

Click Save in the bottom right corner.

Within 5 minutes the Camera Live View page will appear on your Display Hub+ with the selected camera streams available to be viewed. Simply swipe right from the home screen to view the camera stream page.

Enable Doorbell Camera Button Push Notifications to be sent to your Display Hub+

  1. Log into your account on

  2. Click Video in the left-hand menu.

  3. Click settings in the top right corner.

  4. Select your doorbell camera in the Video Device dropdown.

  5. Click Video Device Info.

  6. Check the box next to Send button pushed notifications to panel to stop doorbell button push notifications from this doorbell camera from sending to the Display Hub+.

  7. Click Save.

  8. If you'd like to enable the button push notifications to be sent to the Display Hub+ for any of your other doorbell cameras, repeat steps 4-7 for each one.

Having trouble?

_If you cannot find the Camera Live View page on the Display Hub+ after enabling live streaming to the panel, please make sure your Display Hub+ is connected to Wi-Fi.

If you continue to have issues with the Camera Live View page on the Display Hub+, follow the steps above but select "Disable All" instead of "Enable All" before pressing save. Wait 5 minutes and re-start the steps to enable camera streaming either through the Frontpoint app or website.

Need more help?

Ask a different questionDisplay Hub+
Select a different product
© Frontpoint SupportSitemap