Skip to ContentHere, you'll find support for your Display Hub+.
Display Hub+
How do I change a sensor's chime or switch to vocal announcements on the Display Hub+?
The Display Hub+ is able to announce the name of your sensors along with the action that occurred, such as "Front Door Open", or can chime a sound instead of a vocal announcement. Sensor chimes are a musical beep that will ring each time a sensor is opened; you can select a different one for each sensor if desired. By default, sensor chime volume is set to 6 on the Display Hub+. Chime type and volume can be customized to your liking when setting up the Display Hub+ or directly on the Display Hub+ after completing the setup.
There are 11 different chime types that can be selected to customize the sound the Display Hub+ will make when each individual sensor is activated. If only vocal announcements are preferred, the chime type should be set to "none".
To learn how to change the volume for the Display Hub+'s vocal announcements, beeps and chimes, or media individually through the Frontpoint app, click
"How do I change the volume settings for the Display Hub+?" at the bottom.
Change Sensor Chimes
Tap the drop-down menu icon to access the settings tray on the Display Hub+.
Tap Settings.
Tap Advanced Settings and enter your master code.
Tap Edit Sensor.
Tap the pencil icon next to the sensor you want to make changes to.
Select your preferred Chime Type from the 11 different chime options (or select "none" to disable the chime for this sensor).
Toggle Voice Prompts On/Off to enable or disable the vocal announcement for the selected sensor. The Display Hub+ will announce the sensor name or the change in the sensor's state (like a tamper) when it is toggled to "On".
Tap Save.
Adjust Chime and Vocal Announcement Volume
Tap the drop-down menu icon to access the settings tray.
Select the volume level by tapping on the volume slider at your preferred volume level._
_
To learn how to change the volume for the Display Hub+'s vocal announcements, beeps and chimes, or media individually through the Frontpoint app, click "How do I change the volume settings for the Display Hub+?"