Flood Sensor

Functionality
The Flood Sensor is used to be notified of early leaks or floods. It can be the key to preventing water damage in a home.

Specifications

Manufacturer/Model Number: Interlogix 60-744-95R

Dimensions Detector: 1.8" x 0.94" x 0.5"**

Dimensions Transmitter: 4.5" x 1.13" x 0.94"

Battery: 2x AAA

Battery Life: ~3-5 Years

Compatibility: Simon XT Panel, IQ Panel, Frontpoint Hub

Operating Temperature Range: 10°F to 120°F

Group/Sensor Type: 38/Water: Other Flood

Tamper:
There is a "Press to Program" button inside the sensor.

How to Tamper: Remove the outer cover and press the "Press to Program" button.

Notes:

The cable connecting the Detector and Transmitter is 8 ft long.

Alarms from the Flood Sensor do not cause dispatch but RRMS will call and the siren will sound (trouble beeps only for the Simon XT, no siren). The alarm will stop once the probes are dry.

Both probes must be in the same puddle for the Sensor to detect water.

Some keys or other metal household items can be used to test the detection of the flood sensor. This is preferable to using water because then the alarm may repeatedly sound until the detector is dry.

Mounting

→ Bring the Water and Flood Sensor in the location requiring flood detection.

→ Place the smaller part of the Flood sensor on the floor or surface to monitor.

→ Place the larger part of the sensor on the wall at least 10 inches above the floor.

Placement Recommendation

→ Basement

→ Near a washing machine

→ Near a water heater

→ Near a sump pump