Skip to Content
Help Center
Frontpoint HubHow do I bypass sensors for the Hub?

Frontpoint Hub

Here, you'll find support for your Frontpoint Hub.

How do I bypass sensors for the Hub?

There are 2 ways to bypass sensors with the Hub:

With any sensor in an Open status or in a trouble condition, arm the system using any method (Frontpoint App, Website, Keypad, etc). The sensor will be put into a bypass status.
The sensor will automatically be taken out of the bypass status the next time the sensor is closed or the trouble condition is cleared. For example, if a window is open when the system is armed and is then closed, the window will be armed. If the window is re-opened before disarming the system, it will set off the alarm).

  1. From the home page of the Frontpoint App, tap on the current arming status on the home screen underneath Security System.

  2. Check the box labeled Bypass Specific Sensors.

  3. Select your desired arming mode. This will lead to a page with a checklist of your sensors.

  4. Check any sensors on the list to bypass and tap on the ARM button at the top right.
    Your system will be armed with the selected sensors bypassed. They can be opened or closed any number of times without setting off the alarm. The sensors will automatically be taken off the bypass status the next time the system is disarmed.

Need more help?

Ask a different questionFrontpoint Hub
Select a different product
© Frontpoint SupportSitemap