Skip to ContentHere, you'll find support for your Premium Indoor Camera.
Premium Indoor Camera
How to update the Premium Indoor Camera when WiFi information has changed
If your WiFi information has changed since the initial installation of the camera, follow the step-by-step guide to set it up on the new network.
1
Enter Access Point Mode
Press the Menu button on the top of the camera and use the Volume buttons to scroll until it reads off Access Point Mode. The LED on the camera will turn flashing white.
2
Connect to the wireless network
1.
Use a smartphone, tablet, or computer and navigate to the WiFi settings.
2.
Connect to the wireless network ALARM(XX:XX:XX). The (XX:XX:XX) is the last six digits of the camera’s MAC address, which is located on the bottom of the camera or on the packaging. Your device may protest stating that there isn't an internet connection, this is normal and can be ignored.
3
Go to http://FPSetup
On the same device once it is connected, open a web browser and enter “http://FPSetup” in the URL field.
This will take you to a page that will ask you to select a language. Follow the on-screen instructions to enter your home WiFi information and add the camera to the WiFi network.
4
Update complete when LED turns solid green
Watch the LED light on the camera. It will turn solid green when the connection is complete which may take 1-2 minutes.