Skip to Content
Help Center
Glass Break SensorHow can I test my sensor?

Glass Break Sensor

Here, you'll find support for your Glass Break Sensor.

How can I test my sensor?

The sensor can only be tested in TEST mode, which will be entered for five minutes after the sensor is powered on. The LED will flash once per second during this time, and the sensor can be tested with a glass break detector or other loud noise. If an alarm is detected, the LED will flash rapidly for 2 seconds and an alarm signal will be sent to the panel. If the sensor does NOT trip, check the internal sensitive settings to make sure they are sufficiently high

Need more help?

Ask a different questionGlass Break Sensor
Select a different product
© Frontpoint SupportSitemap